Hi Richard, Looking through Z-Tips, the model should be a ZB2794BG with a C3S chassis. The problem you are having is probably the PIP module. Your can bypass the PIP module by jumping the 4 pin cable (usually a grey cable) back to the main board. Greg ----- Original Message ----- From: "Richard La Placa" <continentaltv@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, July 09, 2004 8:53 AM Subject: [TechAssist] zenith-9-1094-intermittant video Hello all This set has a 9-1094 main board , a 9-1092 smps, and a 9-1084 pip, with a bose audio system built in. it is a big 27" console. The model # is nowhere to be found. The video gets completley modulated over to the point that you cant see anything but very small dashes with tearing. as soon as you change a channel it clears up.I tried the video input and still the same through a vcr. I bypassed the pip module and still same. Never saw this before. It looks like somebody has a cb radio hooked up to the antenna. I know its not in the rf because it happens when you play a tape through the video input as well. It's a very touchy condition because anything you do to interrupt the video corrects it. There are no bad connections. the 9-1094 is nla and I was hoping somebody had a fix. TIA Richard La Placa Continental TV 312 a Park Row Chestertown, Md, 21620 http://www.continentaltv.homestead.com 410-778-1113 (voice & fax) --------------------------------- Do you Yahoo!? New and Improved Yahoo! Mail - 100MB free storage! ---------------------------------------------------------------------------- - Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/