Thanks to all who responded I did find Robert Herring"s suggestion to be the fix rx3277 was bad. --- Robert Herring <supertek66@xxxxxxxxxxx> wrote: > > Look for open 2.7 ohm 1/2 watt resistor near flyback > +200 volt supply for crt video outputs > measure collector of video outputs if less than +100 > volts this is probably > your problem > > ----- Original Message ----- > From: "mike kerchenfaut" <netcom_lima@xxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Friday, September 28, 2001 8:39 AM > Subject: [TechAssist] zenith module 9-1559 bright > with retrace washed out > video help please or prints > > > > > > help please or prints to my email this is a model > > sr3273dt3 module 9-1559 it hase horizontal retrace > > lines bright screen with washed out video the > flyback > > and pix tube are ok Please help Or send me > schematics > > So I can trouble shoot this beast.... > > > > __________________________________________________ > > Do You Yahoo!? > > Listen to your Yahoo! Mail messages from any > phone. > > http://phone.yahoo.com > > Help make your TechAssist online repair tips > > database better! Submit your fixes here: > > http://www.circuitwork.com/techassist/tip/#tips > > To unsubscribe write to: > > techassist-request@xxxxxxxxxxxxx > > with unsubscribe in the subject line. > > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. __________________________________________________ Do You Yahoo!? Listen to your Yahoo! Mail messages from any phone. http://phone.yahoo.com Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.