HI Barry the 12 volts you are seeing on the 2700 is normal..If you disconnect the receiver from the ac supply and re connect you will see the 18 volts. The regulator which is on an heatsink in front will switch after the data is downloaded back to the idling current of 12 volts. Works ok. Alvin Barry Thompson wrote: >HI: Has anyone have a schematic for a Bell expressvu or the Dish network >same 2700. I should be getting 18 volts at the LNB and Iam inly getting >about 12 Thanks Barry >barrystv@xxxxxxx >Barrys TV >Ottawa Canada > > >----------------------------------------------------------------------------- >Lost Password: >http://www.tech-assist.org and select "Login Problems?". >Email Archives: >//www.freelists.org/archives/techassist/ > > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/