just had a samsung txb1920 cka50zh chassis no video. it turned out to be Q911 video blanking transistor was leaky. al marquardt ampm@xxxxxxx ----- Original Message ----- From: <Wallyusmc1@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, March 25, 2002 1:14 AM Subject: [TechAssist] samsung TXK2754, No video > > > > Hi gang, > This set came in with no raster. High voltage and G2 voltages were correct. > Missing two voltages on video CRT IC's. Replaced blown LA7845, Vert IC, and > two .45 ohm supply resistors. This restored video, but only momentarily. > After 20-30 seconds the raster blanks out and Cathode voltages go to source > voltage. Turn set off and back on and perfect picture returns again for > another 20-30 seconds. I know It's losing video drive but can;t figure out > why. Any help would be appreciated. > Walt > > > Walt Chambers, LtCol, USMC (Ret) > Walt's TV/VCR Service > 3753 Mission Avenue, STE 117 > Oceanside, CA 92054 > Ph 760-966-1213 > Fax 760-966-0891 > Mailto:wallyusmc1@xxxxxxx > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > > > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.