[TechAssist] Re: ifisher vcr FvH_810
- From: "peter kowalik" <pe.kow@xxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Tue, 15 Oct 2002 21:46:04 -0500
If it's an old one there may be a dew sensor that would inhibit unit
operation. On some of the older vcr's there were large filters 2200-3300 mf
in the power supply that would cause problems. HTH peter pe.kow@xxxxxxxxxxxx
----- Original Message -----
From: "al m" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Tuesday, October 15, 2002 12:11 PM
Subject: [TechAssist] ifisher vcr FvH_810
>
> It's an old one. When you plug it in the stop light just keeps blinking.
> Won't take tape. The capstan turns when first plugged in as well as the
reel
> but the head doesn't move ,not sure if it is supposed to or not . Anybody
> have any ideas ? Would a bad mode switch do this.
> al marquardt
> ampm@xxxxxxx
>
>
>
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
> ------------------------------------------
> ***NEW*** Tips Added Instantly!!!***
> Submit Repair Tips here:
> http://www.tech-assist.org/secure/tip/
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
------------------------------------------
***NEW*** Tips Added Instantly!!!***
Submit Repair Tips here:
http://www.tech-assist.org/secure/tip/
Other related posts:
