Zenith ticked me off. Module discontinued, no board level parts avail. No parts, no board. OK... I found an old email I sent on a similar 32" Zenith with same module with same fly bad and NLA...The TV was sold, lasted a year, then needed scan caps, but my sub fly continued on OK. Read on: here was my solution. "Date: Tue, 08 Mar 2005 09:54:55 -0500 From: Phil Bader <tjanphyl@xxxxxxxxxxxxxxx> I forgot to mention, last year I had this set in, and it needed a flyback in the 9-2003 module. It was originally a fly# 95-4510-01. (NLA, tritronics). Thru experimentation with other similarsalvage modules here, I installed a 95-4372-01 and it's been doing fine for a year. Nothing shows this as a sub but it works perfectly. (Even now the set failed due to a burnt scan cap CX3220 (1000pf/2KV)but my fly is still good.) Now, Tritronics shows my "sub" as NLA, but you will have a better chance of pulling my number from other salvage boards as I did last year. Just an extra option... Phil Bader " So: Needed an OEM 95-4510 fly. NLA... Used a 95-4372. Works good, full picture. Phil Bader Phil Bader wrote: >The flyback arced and burnt out it's side. This main module is 9-2003. A >previous tech had replaced the fly with a part# 95-4510. I need to know >if this is the correct fly number, and if there are sub numbers to it. >Nothing else appears affected. >Thanks, >Phil Bader > > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/