[TechAssist] Zenith model sl3243lk no vertical sweep
- From: mebonnell@xxxxxxxxx (Old TV Man)
- To: techassist@xxxxxxxxxxxxx
- Date: Mon, 19 Jul 2004 19:03:51 -0500
Andrew,
I don't have a SAMS but do have a zenith schematic.
I will scan the power supply and vertical to you.
Max Bonnell
Bonnell TV
Robinson, IL
Sender: techassist-bounce@xxxxxxxxxxxxx From:
atv2@xxxxxxxxxxxxx(Andrew=A0Soltes) Date: Mon, Jul 19, 2004, 6:10pm
(CDT-2) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Zenith model
sl3243lk no vertical sweep Reply=A0to: techassist@xxxxxxxxxxxxx
hello everyone
=A0=A0=A0=A0=A0=A0=A0=A0in need of service diagram for the 9-1269-2
power and sweep board for this model sl3243lk i have no vertical i did
check vert ic b+ and have it to the ic ,also esr 100uf 50 v cap in
circuit was changed high esr =A0 =A0 =A0 if you can fax to me or up load
to tech-assist thanks for any help
Andy
Andy's TV & VCR Service
662 McKean Ave
Donora,Pa. 15033
724-379-8559 voice/fax
atv2@xxxxxxxxxxxxx
----------------------------------------------
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
