Jeff, sounds like your meter is making a return path to ground. Check that there isn't a broken trace or open resistor somewhere. Gary McCartney McCartney Electronics 7134 Fife Rd, RR 7 Guelph Ontario Canada N1H 6J4 Fax: (519)821-1530 email: number63@xxxxxxxxxxxxx Jeff Dougherty wrote: > > Unit was originally dead. When I test voltage at cathode of DP04, the unit > magically comes alive. > I need to know where to go on this problem. When I get it working, it acts > like bad LED. Takes empty carriage, if you insert a cassette, it spits it > back out three times, then shuts down. > I replaced the center LED and three resistors. Polarity of LED is correct. > Has anyone had either or both of these problems? > Similar to VR2107,VR4107,VR4127,VR4137,VR4207,VR4227. > Thank you. > > Jeff > > FAX 717-564-4952 > Jeff Dougherty > Intrepid Video & Electronics > 501 Luther Rd > Harrisburg, PA 17111 > 717-909-8844 > VCR tips, electronics info & general interest. > www.intrepid-video.com www.tech-repair.net www.thetoolcaddy.com > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. -- Gary McCartney McCartney Electronics 7134 Fife Rd, RR 7 Guelph Ontario Canada N1H 6J4 Fax: (519)821-1530 email: number63@xxxxxxxxxxxxx ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.