The usual repair on these is : Replace Regulator Icx3431 - Str53041, Cx3416 - 100uf 25v. (Bad Esr) & Qx3401 (2n4923) (ECG184) There are a few resistors that may be open right in that area...check all of them for proper value & resolder the entire power supply circuit. If your getting the relay click , the semiconductors in the power supply may still be OK....change the 100uf cap & see if she flies! Jeff Stielau Shoreline Electronics Repair 125 Beechtree Lane Westbrook,CT 06498 860-399-1861 Voice 860-664-3535 Fax jstielau@xxxxxxxx ----- Original Message ----- From: "Dave" <tvman@xxxxxxxxxxxxxxx> To: "Tech Line" <techassist@xxxxxxxxxxxxx> Sent: Monday, October 01, 2001 6:55 PM Subject: [TechAssist] Zenith SY3272D > I'm going on a service call tomorrow for a Zenith SY3272D. Relay clicks but set doesn't come on.I used to replace modules but don't any longer besides cx3416 any ideas? > > Help make your TechAssist online repair tips > database better! Submit your fixes here: > http://www.circuitwork.com/techassist/tip/#tips > To unsubscribe write to: > techassist-request@xxxxxxxxxxxxx > with unsubscribe in the subject line. > Help make your TechAssist online repair tips database better! Submit your fixes here: http://www.circuitwork.com/techassist/tip/#tips To unsubscribe write to: techassist-request@xxxxxxxxxxxxx with unsubscribe in the subject line.