Hi John thanks for the info I will file it for later Eric E M Electronics Deer Lake Nfld Canada John at Main TV wrote: > > That is the GX chassis. With remote, hold menu button until display > disappears (or changes), then 9,8,7,6,enter. Change parameter 00 to value01 > in order to access the entire menu. The cutoffs are 24,25,26 (R,G,B) and > the drives are 27 and 28 (G and B). Remember to return 00 to value 00, then > pust enter to exit. Without the remote, press menu until gone, continue > holding menu plus adjust right and ch up, all at once. John. > John Mielke > Main TV > 636 main St. > Longmont, Co > phone 303 776 6955 > fax 303 776 0792 > maintv2004@xxxxxxxxxxx > > ----- Original Message ----- > From: "Eric Manuel" <tvman@xxxxxxxxxxxxxxx> > To: "tech" <techassist@xxxxxxxxxxxxx> > Sent: Thursday, April 22, 2004 8:54 AM > Subject: [TechAssist] Zenith SY2549S service menu Grey scale??? > > > Hi need to know how to get into the service menu to adjust the grey > > scale... > > Eric Manuel > > E M electronics > > Deer Lake Nfld > > Canada > > > > -------------------------------------------------------------------------- > --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/