What about the CRT socket, and are the RGB drive signals the same P/P Phillip R Hull phil245@xxxxxxxxxxxxx ----- Original Message ----- From: <gulftech@xxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, December 19, 2002 10:25 PM Subject: [TechAssist] Zenith SL3585BT, green screen w/ retrace > > Techs, > > This TV is proving to be a dog. May end up being the CRT, but I don't > have a print to verify. My tech has found heavy load on the green > driver. If the green cathode is floated, a somewhat normal video, > although dark, is present with no green. Have tried filament bypass > routine, without change. My Sencore will not test this tube. > > Does someone have a scan of the CRT pcb--9-1298-05. That would help a > lot. The 120K resistors are all good. My tech has spent far too long on > this puppy! > > TIA, > > > Ken Smith > Gulf Technical Services > 3034 Gulf Breeze Parkway > Gulf Breeze, FL 32563 > 850-934-8324 (Voice) 850-932-0819 (Fax) > > > ________________________________________________________________ > Sign Up for Juno Platinum Internet Access Today > Only $9.95 per month! > Visit www.juno.com > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html