This Zenith SJ2733LK was dead.No chirp when plugged in.All fuses and diodes OK.HOT no short. Uses: signal/main PCB# 9-1053-1, SMPS/Defl PCB# 9-1074-1 I scanned emails referring to Winstips and TechCD cures for this set, concentrating on the deflection board. I changed those suggested parts: HOT TZ1148 (NTE2302), ICX3401 smps control IC (UC3842), Opto-iso IC ICX3402 (162-18-0, NTE3041), Main switcher FET (SMPS) QX3407 (121-1190, NTE2397). TV still would not chirp: SMPS still dead, not oscillating. Final Fix: Final fix was a resistor connected to the control IC,( ICX3401): R3427 (brn-brn-blk-brn-brn: 1K ohm 1/2W) was open. This fed ICX3401. I am sure many of the listed parts were bad.The open resistor was the result of those bad parts. All parts located on the power/deflection board 9-1074-1. Phil Bader -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx For Professional Technicians Only ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/