Zenith Model SF2035N2 main chassis 9-700 This is a Zenith digital series set shoehorned into a 20" set-- 1989 production. (the one with everthing in cans, rgb in, competer control, etc that everone loves, heh heh.....not) The fault is that the set sometimes looses cable chanels in the 30's and 40's. other bands are fine, the other day it also lost ch 11. It appears to be a bad connection as wacking it can get it to work again. So i was considering dressing the tunner conections, but this set is rather conveltuted in its working...would prefer to isolate local first but--- The Key problem is that I can't replicate the failure in the shop hot or cold. It could have something to do with the customer having HRC based cable in their local. Has anyone encounterded this on these digital series sets.(or has anyone actually fixed one without running screaming into the night) Peter Oliver Tucson Radio TV _________________________________________________________________ The new MSN 8: smart spam protection and 2 months FREE* http://join.msn.com/?page=features/junkmail ***************************************************************************** The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.html Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/