Thanks for the info guys. Turned out the customer bought a new TV and gave me this one for hooking up the new one. It did turn out to be Q3404. Cx3418 was ok but instead of being a 470uf/50v it was a 1000uf/50V. It looked like it was that way from the factory. Have you ever seen any 9-520-6 with this modification? Thanks again, Doyle At 12:30 PM 12/28/01 -0500, you wrote: >Doyle: > >Modules in this set are: > > 9-731-02 9-520-06 9-599-04 9-728 9-730 9-771-01 > > >--------------------------------------------------------------- >Text pasted from WinSTIPS 2.0 >http://www.ServiceSoftware.com >--------------------------------------------------------------- > >ZENITH TV 9-520 > >Audio inop > >9-520-02 board: Cx3418 470uf/50v high esr > >--------------------------------------------------------------- > >ZENITH TV 9-520 > >Audio Inop > >C3418 470/50 Check For Audio By Shorting Q19 Ase To Emitter. > >--------------------------------------------------------------- > >ZENITH TV 9-520 > >Audio Inop, 15v Supply Missing > >Q3404 Pnp, Can Use 2sb633 > >--------------------------------------------------------------- > >ZENITH TV 9-520 > >Crackle Of Noise Or Sound Once In A While > >Cx3418 470uf/50v > >--------------------------------------------------------------- > > >My guess is that Cx3418 is bad :-) > > > > >Best regards, > >--== Paul ==-- > >---------- >Paul R. Gendreau, Jr. >Tel: 207-490-1835 >Fax: 207-490-1893 >Email: Paul@xxxxxxxxxxxxxxxxxxx >http://www.servicesoftware.com > > >-----Original Message----- >From: techassist-bounce@xxxxxxxxxxxxx >[mailto:techassist-bounce@xxxxxxxxxxxxx]On Behalf Of Tranbarger Electronics >Sent: Friday, December 28, 2001 2:23 PM >To: TechAssist@xxxxxxxxxxxxx >Subject: [TechAssist] Zenith SE2725R no sound > > >Hello all, > >I'm going on a field service call on a Zenith SE2725R, module #'s >unknown. The sound went out over night. I don't have anything on audio >problems for this model. Does any one have anything on this that I could >check/service in the field. > >Any help is greatly appreciated. > >Doyle > >------------------------------------------ >Help make your TechAssist database better! >Submit your fixes here: http://circuitwork.com/techassist/tip/#tips >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. > >------------------------------------------ >Help make your TechAssist database better! >Submit your fixes here: http://circuitwork.com/techassist/tip/#tips >------------------------------------------ >To UNSUBSCRIBE your email address, click here: >mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >Or send a BLANK email with unsubscribe in the >SUBJECT field to the address above. ------------------------------------------ Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.