[TechAssist] Re: Zenith PVY4661DT PTV, bad converg after line surg.need part ID on 9-1690
- From: Phil Bader <philbad@xxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Mon, 09 Dec 2002 12:31:42 -0500
Senior moment...I've replaced these...Trying to physically locate R3243
and R3244 on sweep module.
Location, please? ;-)
Phil Bader
Phil Bader wrote:
>
> This 46" Zenith PTV unit has a 9-1674 main, but has a bad converg.
> module 9-1690. The house power went on and off several times rapidly and
> this is the result.On this converg panel( 9-1690)two resistors are
> toasted feeding the two STK0392-110 chips (IC4008,4009)
> The resistors are R1460 and R1463. I think they are 1 ohm, need to
> verify.
> I will also change the STK's.
> Phil Bader
> --
> Philip Bader
> Jan Phyl TV Inc. (estab. 1976)
> 3420 Recker Hwy. Winter Haven, Fl. 33880
> Fax (863) 299-8821
> email: philbad@xxxxxxxxxx
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
--
Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880
Fax (863) 299-8821
email: philbad@xxxxxxxxxx
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
