[TechAssist] Re: Zenith PV-4671H Red seems like tint set wrong??
- From: walter wood <wwood_38478@xxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 10 Jan 2003 18:02:31 -0800 (PST)
Yes, as far as I know all ptv crt's are coupled
with fluid.
You probably have an open resistor on the red crt
module. R5102, or 01 or 03 comes to mind, but I'm
at home right now.
You WILL have to take it out of circuit to check
it.
120k, or 180k seems right, but I cannot be sure.
I'll follow up when I get back to the shor.
HTH
Walter
--- Eric Haskins <ehaskins@xxxxxxxxxxxxxxx> wrote:
>
> Hey All Finally getting back to work!!!
>
> I have a a Zenith PV-4671H that seems to work
> fine except everything has
> some what of a red glow about it. It seems like
> the screen flickers once in
> awhile with a sound from the back of the set. I
> have checked all connections
> and havent found any signs of arcing. Convergence
> looks fine and I have
> adjusted screen control for red. Are these tubes
> liquid cooled?
>
> Thanks,
> Eric Haskins
> Eric Haskins Consulting
> www.erichaskins.com
>
> ------------------------------------------
> Submit A Repair Tip For Everyone Here:
> http://www.tech-assist.org/secure/tip/main.html
> ------------------------------------------
> To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
> To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
=====
Walter Wood
Future Tech Home Center
2786 Hwy. 43 N.
Lawrenceburg Tn. 38464
931-829-3337
Fax 931-829-4044
mailto:wwood_38478@xxxxxxxxx
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
