Thanks Leroy for clearing the part #'s up. I was just quoting from memory. It's hell to get old. Max Bonnell Bonnell TV Robinson, IL Sender: techassist-bounce@xxxxxxxxxxxxx From: steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx(Technotronic=A0Dimensions) Date: Sun, May 23, 2004, 12:31pm (CDT+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Zenith PV4547P4 (9-323-04) Reply=A0to: techassist@xxxxxxxxxxxxx Leroy: =A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0=A0= =A0=A0=A0Thanks, Will need to get an approval before getting the parts...so I have some time yet. Good to know this Just In Case. Regards, Steve Hearns Technotronic Dimensions, NY [USA] WWW.TECHNOTRONIC-DIMENSIONS.COM 1-877-817-9885 (Voice / Fax Toll Free - US Only) ----- Original Message ----- From: "LeRoy Westlund" <llw@xxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Sunday, May 23, 2004 12:29 PM Subject: [TechAssist] Re: Zenith PV4547P4 (9-323-04) [Correction] Steve, If you need to replace IC3401, be sure you use Zenith part # 221-291 which crosses to an NTE7002. The 221-466 crosses to a NTE7096, and is the wrong part for your module # 9-323-04. I know you want to try replacing the opto-Isolator IC3402 first,...and we have the correct part number for that one, which is 162-18 (NTE3041). I just wanted to clear up any confusion on this subject. Regards, LLW LeRoy Westlund Westlund TV & Electronics 97 North Main =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "Where there's a will,... Centerfield, UT 84622-0087 =A0 =A0 =A0 =A0 =A0 There's always a way." Ph./Fax 435-528-3822 mailto:LLW@xxxxxxxxxx -----Original Message----- From: LeRoy Westlund <llw@xxxxxxxxxx> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Sunday, May 23, 2004 1:20 AM Subject: [TechAssist] Re: Zenith PV4547P4 (9-323-04) Steve, I can confirm that the part numbers Max has provided, are good numbers. Opto-Isolator is IC3402 Zenith part # 162-18, and IC3401 Reg. IC is part number 221-291 (the 221-466 might be an updated part number, or a kit number that includes the clip, and heatsink, but the original IC itself is 221-291 on the micro-fitche parts list ). LLW LeRoy Westlund Westlund TV & Electronics 97 North Main =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 "Where there's a will,... Centerfield, UT 84622-0087 =A0 =A0 =A0 =A0 =A0 There's always a way." Ph./Fax 435-528-3822 mailto:LLW@xxxxxxxxxx -----Original Message----- From: Max Bonnell <mebonnell@xxxxxxxxx> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Saturday, May 22, 2004 6:34 PM Subject: [TechAssist] Re: Zenith PV4547P4 (9-323-04) =A0=A0Steve I don't have that schematic but I recall thos Zeniths used ICX3401 part # 221-466 (NTE 7096) and ICX3402 part # 162-18 (NTE 3041). I have them both and you can have them because I don't need them. If you want them send me an address. Max Bonnell Bonnell TV Robinson, IL Sender: techassist-bounce@xxxxxxxxxxxxx From: steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx(Technotronic=3DA0Dimensions) Date: Sat, May 22, 2004, 7:13pm (CDT+1) To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: Zenith PV4547P4 (9-323-04) Reply=3DA0to: techassist@xxxxxxxxxxxxx . Any ID on the Opto Coupler? Is it a 4 Pin Dip Like the NEC PS2501 ? Steve Hearns Technotronic Dimensions, NY [USA] WWW.TECHNOTRONIC-DIMENSIONS.COM 1-877-817-9885 (Voice / Fax Toll Free - US Only) ----- Original Message ----- From: "LeRoy Westlund" <llw@xxxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Saturday, May 22, 2004 1:57 PM Subject: [TechAssist] Re: Zenith PV4547P4 (9-323-04) Steve, Only tips I can find, are: Check C3416 (100@200), and replace IC3402 (opto-isolator). HTH, LLW LeRoy Westlund Westlund TV & Electronics 97 North Main"Where there's a will,... Centerfield, UT 84622-0087 =3DA0 =3DA0 =3DA0 =3DA0 =3DA0 There's always a = way." Ph./Fax 435-528-3822 mailto:LLW@xxxxxxxxxx -----Original Message----- From: Technotronic Dimensions <steve@xxxxxxxxxxxxxxxxxxxxxxxxxxx> To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx> Date: Friday, May 21, 2004 9:24 PM Subject: [TechAssist] Zenith PV4547P4 (9-323-04) Cannot Find a SAMS on this one. Circa 1986 Set. Need Values of R3424 and R3425. If anyone Has a Diagram or a Scan Let me know. I did not check our Archives yet because I think the Set is too old. Will Check Leter just to be sure. Set Not Powering Up - Found Some Tips on Some BAd Caps, but if anyone Has worked on this Chassis, I'd Appreciate a Chat With them. Steve Hearns Technotronic Dimensions, NY [USA] WWW.TECHNOTRONIC-DIMENSIONS.COM 1-877-817-9885 (Voice / Fax Toll Free - US Only) ---------------------------------------------- ---------------------------------------------- - -- ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/