Ronnie, New HDTV model... no info on it.. I'm uploading complete sercice manual to members area... Bob Bob's TV Worcester, ma -----Original Message----- From: Ronnie Alston <raalston@xxxxxxxxxxxx> Sent: Apr 9, 2004 5:38 PM To: "\"Tech Assist\"" <techassist@xxxxxxxxxxxxx> Subject: [TechAssist] Zenith Mod C32V22 Pulses when turned on I installed a known good P9-2297-01 hi-voltage power supply board and it done the same thing. High voltage goes up to about 10k when it pulses. I disconnected the plugs to the picture tube socket, each plug on the P9-2296-01 Board but some of them would of course not allow the set to come on at all, removed the audio output ic, removed the screen and focus wires from socket. This board has several regulator ic's on it. I beleive this board to have the problem on it but I don't have the schematic or a way of isolating the problem. Any help would be appreciated. Thanks in advance, Ronnie Alston Alston's TV Service 110 North Third Street Ozark, Ark, 72949 raalston@xxxxxxxxxxxx ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/