[TechAssist] Re: Zenith AKB circuits
- From: "Ron Miller" <rlmbkm@xxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Sat, 8 Feb 2003 12:17:37 -0600
Look for a bad e-cap near AKB ic.
Country TV
Ron Miller
484 FM444 S.
Inez,TX 77968-5002
V.(361)782-6419. F.(361)782-9149
e-mail: rlmbkm@xxxxxxxx
----- Original Message -----
From: "al m" <ampm@xxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Saturday, February 08, 2003 12:02 PM
Subject: [TechAssist] Zenith AKB circuits
I have run across 3 of these in the last week. The picture has a green tint
to it and there is no adjustment. Just wondering what the rest of you techs
do about a problem like this. The tube checks good but the green is stronger
than the other two. Did anyone try changing resistors to lower the green to
the other two colors?
al marquardt
ampm@xxxxxxx
****************************************************************************
*
Submit A Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.html
****************************************************************************
*
For automatic password retrieval 24 hours a day, go to:
http://www.tech-assist.org and select "Lost your Login Info?".
****************************************************************************
*
*****************************************************************************
Submit A Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.html
*****************************************************************************
For automatic password retrieval 24 hours a day, go to:
http://www.tech-assist.org and select "Lost your Login Info?".
*****************************************************************************
Other related posts:
