Hi Shaun some more to check Eric TELEVISION Zenith 9-1690 Poor Convergence Replace IC4008 & IC4009. ICs are Zenith #223-51, both STK392-110, as well as Resistors R4161, R1460, R4163, and R4162 all 1 ohm/1/2 watt. TELEVISION Zenith 9-1690 Poor Convergence R4161 & R1460 both 1 ohm 1/2W. Check 26V suppy from 9-1674 CR3419 & FX3460 5A TELEVISION ZENITH 9-1690 convergence r 4160;r4161;r4162;r4163 all 1 ohm 1/2 watt TELEVISION ZENITH 9-1690 Convergence way off, no control of convergence. R4151M (1k SMD) open, off pin 3 of plug 3C8 on 9-1690 convergence module TELEVISION ZENITH 9-1690 convergence replace R-4160; R-4161; R-4162; R4163 all 1 ohm, 1/2 watt E M Electronics Deer Lake NL Canada tvman@xxxxxxxxxxxxxxx eric.manuel@xxxxxxxxx ----- Original Message ----- From: "Shaun" <satguy@xxxxxxxxxxxxx> To: "tech" <techassist@xxxxxxxxxxxxx> Sent: Friday, October 22, 2004 2:12 PM Subject: [TechAssist] Zenith A60M91W1 Distorted picture still > This set was dead when it came in I replaced TX3204 (flyback), Q3200 (horz > out), QX3201, CRX3412, CR3204, CR3206, RX3206 and R3252 some of these parts > came in a kit from Tritronics. Now the set comes on but the picture is > erratic and the convergence looks like it is not working at all. I replaced > the convergence module (9-1690) and it looks the same. I am missing > something on the 9-1978-1 board somewhere, but I have been looking for days > now and can't find the problem anyone have any advice? > > Shaun > > Advanced Electronics > 224 West Riverview Ave. > Fort Morgan, CO 80701 > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/