[TechAssist] Zenith 46" Proj TV w/ convergence issue
- From: <fremur01@xxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Thu, 9 Dec 2004 14:52:58 -0500
Hello,
This 10 y/o projection set has a curvature distortion
at the top of the picture and the convergence is off
I'm wanting to swap out the 2nd convergence module
(9-1318-2A) but Tritronics says part is NLA. Will simply
replacing the (STK391-020) IC'S at Loc IC4001 TO IC4003
usually correct this? I dont see any burnt components.
I have no service literature and am
seeking case history info on this model.
Assistance is appreciated.
ZENITH MDL: PV4663RK CONVERGENCE PROBLEM
Thanks,
Fred
MTS Electronics
Fayetteville, NC
fremur01@xxxxxxxxx
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
