[TechAssist] Re: UP-DATE -Symphonic TVCR model TVCR9G1 Dead
- From: "LeRoy Westlund" <llw@xxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Mon, 20 Jan 2003 19:40:04 -0700
Jerry,
The ribbon cables still looks good, and it's been in and out of there about
10-12 times.
UP-DATE: It's not a tape deck problem. It's a NO start problem.
I get a Horz drive pulse, at the base, and collector of the Horz driver ,
and at the base of the H.O.T.,....but, it's only there for 1 second, and I
can't tell if it's on freq. or not.
H.O.T checks good, but won't fire up. Going to try a new H.O.T., anyway.
LLW
LeRoy Westlund
Westlund TV & Electronics " Walk tall,...Walk straight
93 North Main and look the world
Centerfield, UT 84622-0087 right in the eye "
Ph./Fax 435-528-3822
mailto:LLW@xxxxxxxxxx
-----Original Message-----
From: J Silverman <greentron@xxxxxxxxxxxxxxxx>
To: techassist@xxxxxxxxxxxxx <techassist@xxxxxxxxxxxxx>
Date: Monday, January 20, 2003 3:35 PM
Subject: [TechAssist] Re: Symphonic TVCR model TVCR9G1 Dead
>
>Check the loading motor ribbon cable at the connector end to see if one of
>the traces has rolled up. Those cables are designed for one insertion at
the
>most.
>Jerry Silverman
>Greentron Inc
>4 Newland Ave
>Greenville SC 29609
>864 232 3889
>Fax 271 2080
>mailto:greentron@xxxxxxx
>----- Original Message -----
>From: "LeRoy Westlund" <llw@xxxxxxxxxx>
>To: "TechAssist" <techassist@xxxxxxxxxxxxx>
>Sent: Sunday, January 19, 2003 7:29 PM
>Subject: [TechAssist] Symphonic TVCR model TVCR9G1 Dead
>
>
>>
>> Hi Gang,
>> This (high end) Symphonic TVCR9G1 is a dead unit.
>> When I push the pwr. button, red light blinks for one second, but pwr.
>don't
>> turn on.
>> Head cleaner tape was stuck in unit.
>> I manually removed cassette, and tested my standby voltages. They all
test
>> OK.
>> I cleaned mode switch. Mech alignment seems to be OK, but, I may need to
>> disassemble, to double check. I was just hoping that one of you could
give
>> me some more ideas, before doing a mech align. proceedure.
>> I replaced IC670, and IC671. Also replaced C675, C1675, and C1622.
>> I also checked D1655. SMPS seems to be working OK. Unit just won't fire
>up.
>> Oh,...yes,...I even replaced the center LED. NO help.
>>
>> All suggestions are appreciated.
>> Thanks,
>> LLW
>>
>> LeRoy Westlund
>> Westlund TV & Electronics " Walk tall,...Walk straight
>> 93 North Main and look the world
>> Centerfield, UT 84622-0087 right in the eye "
>> Ph./Fax 435-528-3822
>> mailto:LLW@xxxxxxxxxx
>>
>>
>> ------------------------------------------
>> Submit A Repair Tip For Everyone Here:
>> http://www.tech-assist.org/secure/tip/main.html
>> ------------------------------------------
>> To REMOVE your email address, click here:
>> http://www.tech-assist.org/unsubb.html
>> To CHANGE your email address, click here:
>> http://www.techassist.net/forms/change.html
>>
>>
>
>------------------------------------------
>Submit A Repair Tip For Everyone Here:
>http://www.tech-assist.org/secure/tip/main.html
>------------------------------------------
>To REMOVE your email address, click here:
> http://www.tech-assist.org/unsubb.html
>To CHANGE your email address, click here:
> http://www.techassist.net/forms/change.html
>
>
------------------------------------------
Submit A Repair Tip For Everyone Here:
http://www.tech-assist.org/secure/tip/main.html
------------------------------------------
To REMOVE your email address, click here:
http://www.tech-assist.org/unsubb.html
To CHANGE your email address, click here:
http://www.techassist.net/forms/change.html
Other related posts:
