No...but you do have to transfer your new settings to the EPROM, before turning it off. -Ed- Ed Gaidies Tel-Tek Electronics Ontario-Canada teltek3@xxxxxxxxxxxx -----Original Message----- From: techassist-bounce@xxxxxxxxxxxxx [mailto:techassist-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Sent: Thursday, November 20, 2003 10:39 PM To: TECH-ASSIST Subject: [TechAssist] Toshiba TZ50V61, 1999 model, convergence issues I replaced the red yoke on this set and after setting the convergence using the customer convergence adjustments, I unplugged the set and plugged it back in, and the convergence had to be redone again. Does the set have stay plugged in for a certain time to retain the new settings? TIA Kevin Wilks Kevin's TV & Video Repair Penticton BC Canada kevintv@xxxxxxx ************************************************************************ ***** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/ ***************************************************************************** Classifieds! Buy or Sell! http://sell.tech-assist.org The Tech Address Book: http://www.tech-assist.org/secure/tip/contact.htm Add a Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.htm Lost Password: http://www.tech-assist.org and select "Lost your Login Info?". Email Archives: //www.freelists.org/archives/techassist/