All 3 colors skewed?? Or only one? Did you align it only to find out the align stopped short of correcting it?....... You may have: Bad 110's from a cheap supplier (not likely?) A bad crt (had one myself) or possibly centering rings need adjusted....I've had to do that before. Damon Brunger Telrad Electronics Fort Wayne IN ----- Original Message ----- From: "Robert Father" <rfather@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Thursday, March 31, 2005 10:07 PM Subject: [TechAssist] Toshiba TZ43V61 convergence problem > Hi Techs, > I have a toshiba TZ43V61 (TAC9953) . I replaced the stk 392 110 > convergence chips. I also checked "in circuit" resistors and fuses. The top > left corner of the screen is skewed. Has anyone seen this. It is the same > problem that the set came in with. Thanks in advance. > > Bob Father > Electronics Specialist Inc. > Albany, New York > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > > > > -- > Internal Virus Database is out-of-date. > Checked by AVG Anti-Virus. > Version: 7.0.308 / Virus Database: 266.8.0 - Release Date: 3/21/2005 > > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/