From WINSTIPS: --------------------------------------------------------------- Text pasted from WinSTIPS 2.0 http://www.ServiceSoftware.com --------------------------------------------------------------- TOSHIBA CF3264K Vertical - Insufficiant Vertical Height Tip By Perrry Bower W/Electric Medic 706-863-3424 Or Elecmed1c@xxxxxxx Replaced C342 (1uf/50v) Red Cap, And C305 (1uf/50v) Red Cap. 08/31/1998 --------------------------------------------------------------- TOSHIBA CF3264K Vertical - Streached at top Stroud TV & Audio Inc. Replaced C330 10mfd 50v --------------------------------------------------------------- TOSHIBA CF3264K Vertical linearity problems Phil Bader C342, C305 both 1uf/50v --------------------------------------------------------------- --------------------------------------------------------------- Text pasted from WinSTIPS 2.0 http://www.ServiceSoftware.com --------------------------------------------------------------- TOSHIBA CF3264 Vertical collapse, sometimes has partial sweep at top Stroud TV & Audio Inc. Check pin 2 of IC301, if DC=~5v, then replace C342 1mfd 50v cap off of pin 2 of IC 501. The vertical output (IC301) is probably good. --------------------------------------------------------------- Bob Waterman, CET® #RI-28 Master Technician License #9109 Service Manager Gemini Computer, TV, & Security Alarms (508)695-7302 (508)695-7769 FAX geminitv@xxxxxxxxxxxxxxxx geminitv@xxxxxxx ----- Original Message ----- From: "Damon" <DAMON101@xxxxxxxxxxxxxx> To: "TechAssist" <techassist@xxxxxxxxxxxxx> Sent: Thursday, January 09, 2003 8:05 AM Subject: [TechAssist] Toshiba Mdl CF3264K /Chassis TAC9024 - VERTICLE SHRUNK > > Hello everyone, > > I replaced 3 capacitors in the Verticle section, and it seems the verticle > foldover worsened, not sure if my caps were defective or not. Cust has had > this problem for several months before calling us out. I'll admit I'm thrown > off by this symptom. > > I replaced C308, C345, and C something-or-other (all located on the > front-right side of AN5521 output). > The top and bottom of picture is shrunk, looked for that "red cap/2.2uf > located by video jungle"..... found none....only 1uf/50v brown caps. > > Not sure if I'm missing a capacitor, or if the AN5521 IC or B+ to it is low, > and I wonder if this tv chassis has the Infamous "Red Capacitor" problem or > not. > > Any info regarding verticle problems on this TV would be appreciated. > > Damon Brunger > damon101@xxxxxxxxxxxxxx > Telrad Electronic Services > Ft Wayne, IN 46815 > > > > > ------------------------------------------ > Submit A Repair Tip For Everyone Here: > http://www.tech-assist.org/secure/tip/main.html > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > > ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html