Replaced the 4.7@50 pulled and checked C861, it's ok.do you have the PS print? Country TV Ron Miller Inez, TX. 77968 ----- Original Message ----- From: "Larry E" <videotech@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Friday, October 29, 2004 3:41 PM Subject: [TechAssist] Re: Toshiba CF32C40 tac9321, relay click dead, no smps power up > Ron, you didn`t list caps you checked so check these if your set has them > C861 2200pf @ 1kv and C863 4.7 @ 50v Larry E > > Larry Eastman > American TV & Electronics > Crystal River, Fl. 34428 > > "Ron Miller d.b.a. Country TV" wrote: > > > Plug in relay clicks have 160 vdc on pin 1 of Q801 STR S5241,no other > > voltages developed from SMPS. > > R862 ( 200k) start up resister off 160volt line is good, caps in power > > supply area esr good. T862 rings good, also flyback rings good. > > No burnt or heat stress areas , no print. > > Need tips or print of PS area. tia > > Country TV > > Ron Miller > > Inez, TX. 77968 > > > > -------------------------------------------------------------------------- --- > > Lost Password: > > http://www.tech-assist.org and select "Login Problems?". > > Email Archives: > > //www.freelists.org/archives/techassist/ > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/