Poor decription.......sounds like you have problems in the vertical circuit. Change any cap in the vert circuit. i.e. c301, c305 , c308 if the vert ic is ic301 for example. Look for the one near the center of the board near the jungle ic. ----- Original Message ----- From: "Lynn Hedspeth" <lhedspeth@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 21, 2006 4:20 PM Subject: [TechAssist] Toshiba CF3274J Vertical Blanking > Toshiba Model: CF3274J > Chassis: TAC 8961 > Wondering if anyone has run into this on this unit before. > > Picture is full with no video or snowy raster, but when > video > is present the top 3", and bottom 1" is blanked out with a > black bar. The image is full underneath the bars. When you > pull the cable the snowy image is full again. > > Also the bars do not have a clean distinct edges, the edges > are > feathered. > > Thanks > ****************************** > Lynn C. Hedspeth, CET > Hedspeth Electronics > Iron Station, NC > HedTV@xxxxxxxxxxxxx > ****************************** > > ----------------------------------------------------------------------------- > Remove: http://www.tech-assist.org/remove.htm > Set Vacation > mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/