Well, this is from a smoker. Stains inside on the boards, the dust is brown and gets all over you. Nasty. Customer said at first, the picture brightness was dim, then would get very bright and shut down except the sound worked. She is not technical at all, so I take this in consideration. I checked the power/defl board. Two power devices, D461 (diode, looks like a HOT on a sink) seems OK, and a HOT Q404 tested OK. Four pico fuses near the front, F850,851,852,853 all test OK in circuit. Nothing visable. I plug it in, can hear a quick double click from a relay at rear. I then push power with the remote and a click, a low audio thump thru speakers, nothing. So, the standby supply is running to recieve the remotes' on command. Searched my archives and techrepair CD with no results. Anyone have experience with this chassis? Thanks, Phil Bader -- Philip Bader Jan Phyl TV Inc. (estab. 1976) 3420 Recker Hwy. Winter Haven, Fl. 33880 Fax (863) 299-8821 email: tjanphyl@xxxxxxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/