No..that's alright, it is a quad switch. -Ed- > > Figures, about 3 seconds after I sent my last post regarding this, I > realized I made a mistake. The 4066 is not a hex inverter as I > suggested, it is a quad analog switch. Sorry about that. > > > Gary > > > Ed, the 4066 is a CMOS digital hex inverter. Are you sure you replaced > the original with the correct chip? > > If you haven't already, check that the wires are not broken off the tape > head. Also, the internal record/ playback switch might need a good spray > with contact cleaner-lube. This switch can also be the form of an IC on > newer decks, but that model sounds like an older one. Sorry I don't have > schematic if the problem turns out to be in the amp circuit. > > > Gary McCartney > > McCartney Electronics > 7134 Fife Rd, RR 7 > Guelph Ontario Canada N1H 6J4 > Fax: (519)821-1530 > email: number63@xxxxxxxxxxxxx > > > > > Tel-Tek Electronics wrote: >> >> To all our Stereo Enfiianados; >> Have a TEAC double cassette here, with no output from Cassette II. >> (Recording Deck). I have no circuit on this, have changed one IC, Quad Amp >> TC4066BP. >> Really changed on speculation, because it was in that area, and I had it in >> stock. (Now that's desperate). >> Anyone run across this, I get nothing from that side, not even a slight hum. >> Any help, would be appreciated. >> >> Thanks; >> -Ed- >> >> Tel-Tek Electronics >> Midland, Ontario. Canada. >> >> teltek2@xxxxxxxxxxxx >> >> Secondary........ >> teltek35@xxxxxxxxxxx >> >> Tel-Tek Electronics. >> >> ------------------------------------------ >> Make your TechAssist database better! >> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ >> ------------------------------------------ >> To UNSUBSCRIBE your email address, click here: >> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> Or send a BLANK email with unsubscribe in the >> SUBJECT field to the address above. > > -- > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. > ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.