Hi Tomlee, Replace LED. It is the large LED located on the circuit board directly below the prism between the tape end sensors. It's a common failure. Hope this helps. Bill Premium Technologies Ocean Park, WA. 98640 Phone: (360) 665-5984 Fax: (605) 253-4530 email: premtech@xxxxxxxxxxxxxx ----- Original Message ----- From: "Tomlee" <t8872695@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, March 25, 2002 3:55 PM Subject: [TechAssist] Symphonic TVCR19G1 > > Hello friends. > Unit comes in dead. Replace power transististor in power supply. It comes > on, everything just fine but It play video > tape only 10 seconds then power shut down. Any ideas > what to be check is appriciated. > Dang TVCR > Http://www.tvcrcomputers.com > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.