Maybe the reel brakes are not working properly so some of the tape jumps back out after the reels have finished tightening up the tape. Jerry Silverman Greentron Inc 4 Newland Ave Greenville SC 29609 864 232 3889 Fax 271 2080 mailto:greentron@xxxxxxx ----- Original Message ----- From: "Phil Bader" <tjanphyl@xxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, April 06, 2004 1:41 PM Subject: [TechAssist] Symphonic (Funai) 13" TVCR SC3813. leaves a bit of tape out when Ejected > I try to make those subject lines brief, but just can't! ;-) Symphonic > SC3813( 13 inch Funai made). Type with the single belt at rear. > Orig. complaint was ate tapes,etc. I cleaned the deck, relubed, cleaned > mode switch, reinstalled. Replaced two tactile switches in front (had > corrosive on them). And checked/retimed mech. > Now, Will accept tape, auto load, play, allthe mechanical functions OK. > Push "stop" and "eject" and will do so, but just before the tape ejects, > it leaves a bit of tape out of the cassette to get snagged on something. > Like it won't snap it in all the way. Just a bit. > Suggestions? > Phil Bader > > -- > > Philip Bader > Jan Phyl TV Inc. (estab. 1976) > 3420 Recker Hwy. Winter Haven, Fl. 33880 > Fax (863) 299-8821 > email: tjanphyl@xxxxxxxxxxxxxxx > > > > -------------------------------------------------------------------------- --- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/