[TechAssist] Svc Menu access Need eeprom set up CTC197
- From: Philip Bader <tjanphyl@xxxxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Thu, 29 May 2003 13:00:47 -0400
You enter the svc menu the same as the earlier ones.Front panel method:
Turn it on.
Press and hold the menu button.
Press and release the power button.
Press and release the VOL+ button.
Release the menu button.
Now in svc menu mode:
After entering,you see:
P: 0 V: 0
(Chan up/dn changes the P settings, Vol up/dn the V setting)
You must now enter the pass code.
Advance the "V" to 76 with the vol up.
(the V passcode must be set to 80 for front panel (remote control)
convergence adjustments or to 200 for chipper check to let the CC take
over with the alignments and disables the panel adj)
Once the oasscode is set, you see:
P:xxx V:xxx
(where "xxx" is actually the numbers in the memory now,like P: 17 V:
27 for example.
Now advance to the needed parameter number and change the values as
needed.
Parameter # Description:
0 Security Pass
1 Error code
2 Error code
3 Error code
4 Horix Phase
5 EW DC (Horiz size)
6 Pin Cush Amplitude
7 Pincush Tilt
8 Pin Top Corner Correction
9 Pin Bottom Corner Correction
10 Vert Centering
11 Vert Size
12 Vert Countdown Mode
13 Red Bias
14 Green Bias
15 Blue Bias
16 Red Drive
17 Green Drive
18 Blue Drive
19 Gemstar OSD Horizontal
20 Gemstar OSD Vertical
21 Gemstar Horiz. PIP
22 Gemstar Vert. PIP
23 Gemstar PIP Window Vertical
That should get you in the ballpark.
Good luck.
Phil Bader
Keith Trumbla wrote:
>
> I need to set the greyscale on this CTC197. The parameters are different from
> the older ones. I know the first 3 are error codes. Which ones are for the
> RGB levels ?
> Keith Trumbla
> BEM Electronics Inc.
> 839 Ellice AVE
> Winnipeg, Manitoba,
> Canada R3G 0C3
> Ph.(204)775-2875 Fax.(204)774-9192
> www.bemelectronics.com
> *****************************************************************************
> The Tech Address Book:
> http://www.tech-assist.org/secure/tip/contact.html
> Add a Repair Tip Here, or Change/Remove your Email Address:
> http://www.tech-assist.org/secure/tip/main.html
> Lost Password:
> http://www.tech-assist.org and select "Lost your Login Info?".
> Email Archives:
> //www.freelists.org/archives/techassist/
--
Philip Bader
Jan Phyl TV Inc. (estab. 1976)
3420 Recker Hwy. Winter Haven, Fl. 33880
Fax (863) 299-8821
email: tjanphyl@xxxxxxxxxxxxxxx
*****************************************************************************
The Tech Address Book:
http://www.tech-assist.org/secure/tip/contact.html
Add a Repair Tip Here, or Change/Remove your Email Address:
http://www.tech-assist.org/secure/tip/main.html
Lost Password:
http://www.tech-assist.org and select "Lost your Login Info?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
- » [TechAssist] Svc Menu access Need eeprom set up CTC197
