Have replaced a couple micro's (IC001) on these sets. Seem to be high failure item. Available from Tritronics for $20, also includes IC002. Not the easiest in the world to do. Original no longer available but sub works. Think part # TSASK03ESER1 is the part # of replacement. Don Aurora Electronics Florida Aurtron@xxxxxxxxxx ----- Original Message ----- From: <HSWAD@xxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Saturday, June 18, 2005 6:08 PM Subject: [TechAssist] Subject: Panasonic CT27G6E not programmable > > This set turns on and once on displays the nine squares for menu selection. > No matter what push button you press after that it still displays those nine > OSD squares. Left alone it will then go to a snowy raster. Channels will not > select, volume will not adjust. Placing it in the service mode gets you the > initials CHK 0000 in either red or yellow in the upper left corner of the > raster but you can go no further. TIA, Hollis Bates, EE-retired, Lewiston, > Maine, _HSWAD@xxxxxxxx (mailto:HSWAD@xxxxxxx) > > > -------------------------------------------------------------------------- --- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Set Vacation mailto:ecartis@xxxxxxxxxxxxx?subject=set%20techassist%20vacation Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/