Hi: I would check the + & - supplied voltages to the IC via fuses see if they are normal??.I though they are 3.25a fuse. I normally replace them with 4 amp,250v fuses. Frank Luu --- Ttkirkpat@xxxxxxx wrote: > Fuses on convergence module were bad. Replaced > convergence ic's, fuses and > filters on convergence module. Set ran great for 3 > days. Replaced fuse and > ic's again with Sony originals. Ran great 3 days- > then out again. Replaced > fuse and convergence is perfect but can find no > reason for repeat failure. I > have not had Sony yokes go bad and nothing smells as > if it is burning. Thanks > to anyone who can help! From Mike at the Video > Center. My e-mail is > ttkirkpat@xxxxxxx > > > ***************************************************************************** > Submit A Repair Tip Here, or Change/Remove your > Email Address: > > http://www.tech-assist.org/secure/tip/main.html > ***************************************************************************** > For automatic password retrieval 24 hours a day, go > to: > http://www.tech-assist.org and select "Lost your > Login Info?". > ***************************************************************************** __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - forms, calculators, tips, more http://taxes.yahoo.com/ ***************************************************************************** Submit A Repair Tip Here, or Change/Remove your Email Address: http://www.tech-assist.org/secure/tip/main.html ***************************************************************************** For automatic password retrieval 24 hours a day, go to: http://www.tech-assist.org and select "Lost your Login Info?". *****************************************************************************