I have this Sony VCR, model SLV555 which will not power up and the front panel display is not lit either. I found a 1500uF, 25V cap in the power supply that was leaky. Replaced that and a few others with high ESR. Also checked the diodes and made sure that D207 has 16V on the cathode. The ON/OFF pin 2 on the 3 voltage regulators (3120C, 3120C and 3050C) are at 0.8V all the time, even when I push the power button. Does anyone have a list of the proper voltages on the power supply connector pins and the source from which the regulator ON/OFF pin gets a HI signal for power? Power supply is model APS-01UC, Sony part number 1-413-468-13 Thanks for any help. -- Gary McCartney McCartney Electronics Guelph Ontario Canada Est. 1984 email: gary (at) number63.ca ----------------------------------------------------------------------------- Jokes, complaints, off topics, general chat. Everything other than repair help problems can be found at this new list. No archives and posts will not be found on Google or any other engine!To remove or join, email chat-request@xxxxxxxxxxxxxxx with remove or join as the subject. Send to the list at chat@xxxxxxxxxxxxxxx once subscribed. ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/