Thanks Ron That is a helpful site. I still have a problem with the VCR. Cleaning mode switch didn't fix, but at least it is aligned correctly. Paul Ron Purkhiser <rpurkhis@xxxxxxxxxxxxxxx> wrote: Nice website. Scroll down. http://www.studiosoundelectronics.com/mbk-89.htm Ron ----- Original Message ----- From: "Paul" To: Sent: Monday, March 21, 2005 6:38 PM Subject: [TechAssist] Sony SLV686HF VCR mode switch >I took this switch apart to clean it and when I put it back together I >discovered there is no obvious timing mark on the body. I see a dot on the >gear that I assume is for timing, but no mark to align it to. The only >thing that I see is a hole that is near the outside edge of the body that >is black as compared to many other holes the same size that have copper >showing through them. Don't know if this can be answered on this forum with >that much info or not, and without pictures. > Paul > > > > Paul ,B > Central TV&Video > 911W Grand Ave > Grover Beach Ca. > (805)481-8084 > > ----------------------------------------------------------------------------- > This Email List is Public. Remove: http://www.tech-assist.org/remove.htm > Lost Password: http://www.tech-assist.org and select "Login Problems?". > Email Archives: //www.freelists.org/archives/techassist/ > ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/ Paul ,B Central TV&Video 911W Grand Ave Grover Beach Ca. (805)481-8084 ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/