[TechAssist] Re: Sony HOT Subs
- From: Jorge Camboni <geo@xxxxxxxxxxxxx>
- To: techassist@xxxxxxxxxxxxx
- Date: Wed, 30 Jun 2004 01:33:13 -0500
12A unit 2SC5048 usually works great in place of 5148 / 2SD1885/87 or
BUH517 and much cooler
At 11:27 a.m. 28/06/2004 -0400, you wrote:
>Hello everyone,
>
>I am working on a Sony KV-35v36, and it had a shorted H-out and power
>supply x-sistors. I usually change out the 2sc4927 with a 2sd1881 or
>NTE2353 (8A vs 10A, both with damper) because they run cooler. This set
>uses a 2sc5148 (no damper, 8A) I was wondering if there is a good 10A sub
>to use besides the NTE2354, Such a big set I don't feel like lugging it
>around more then I have to. And I would like to use a "real" x-sistor, not
>the NTE. But I can if need be. TIA
>
>
>
>
> Thanx,
>
>Scott Beebe
>Ohm Electronics Inc.
>609 W. Clinton St.
>Ithaca NY 14850
>Voice: (607) 273-8406
>Fax: (607) 273-8743
>WWW.OhmElectronicsInc.com
>mailto:Scott@xxxxxxxxxxxxxxxxxxxxx
>
>
>-----------------------------------------------------------------------------
>Lost Password:
>http://www.tech-assist.org and select "Login Problems?".
>Email Archives:
>//www.freelists.org/archives/techassist/
Jorge Camboni, GY Electronics, Richardson, TX
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
