Traced problem to Q172 on the VA-67 board, when good the base bias is about 1.2 volts with good video signal, when bad the video signal is still good but the bias on base is only about .6 (point 6) volts so there is not much signal passing through to the emitter. Looks like the video component is getting passed but not the sync pulses due to improper biasing. Collector voltage stays at about 5 volts. Could someone with a schematic tell me where the base bias comes from? Thanks, ******************************************************************************************************************* Since 1972 Jim Myers Telrad Electronics Fort Wayne, Indiana ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/