[TechAssist] Re: Sharp VLE39U picture jumps
- From: "J Silverman" <greentron@xxxxxxxxxxxxxxxx>
- To: <techassist@xxxxxxxxxxxxx>
- Date: Fri, 1 Mar 2002 12:52:44 -0500
Fooled me! Noticed that I could affect the problem by manipulating the
supply guide post. Adjusting the hight one half turn CCW eliminated the
problem.
Jerry Silverman
Greentron Inc
4 Newland Ave
Greenville SC 29609
864 232 3889
Fax 271 2080
mailto:greentron@xxxxxxx
----- Original Message -----
From: "Premium Technologies" <premtech@xxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Thursday, February 28, 2002 11:40 PM
Subject: [TechAssist] Re: Sharp VLE39U picture jumps
>
> Hi Jerry,
> If you only have the intermittent disturbance isolated to one field could
it
> just be that your video heads need a good demagnetizing? My thought is
that
> smaller particles could be interfering with resonation on one channel or
one
> side of one channel might be slightly cracked but not separated?
> Bill
>
> Premium Technologies
> Ocean Park, WA. 98640
> Phone: (360) 665-5984
> Fax: (775) 860-7747
> email: premtech@xxxxxxxxxxxxxx
> ----- Original Message -----
> From: "J Silverman" <greentron@xxxxxxxxxxxxxxxx>
> To: <Techassist@xxxxxxxxxxxxx>
> Sent: Thursday, February 28, 2002 5:18 PM
> Subject: [TechAssist] Sharp VLE39U picture jumps
>
>
> >
> > Playing any tape, picture is jumpy on monitor but stable on the LCD.
Scope
> > on video out shows some sort of intermittant disturbance in vertical
sync
> > area of one field only, as if head switching was unstable. Have checked
> > guide seating and back tension.
> > Jerry Silverman
> > Greentron Inc
> > 4 Newland Ave
> > Greenville SC 29609
> > 864 232 3889
> > Fax 271 2080
> > mailto:greentron@xxxxxxx
> >
> >
> > ------------------------------------------
> > Make your TechAssist database better!
> > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> > ------------------------------------------
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > Or send a BLANK email with unsubscribe in the
> > SUBJECT field to the address above.
>
> ------------------------------------------
> Make your TechAssist database better!
> Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
> ------------------------------------------
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> Or send a BLANK email with unsubscribe in the
> SUBJECT field to the address above.
>
>
------------------------------------------
Make your TechAssist database better!
Submit Repair Tips here: http://www.tech-assist.org/secure/tip/
------------------------------------------
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Or send a BLANK email with unsubscribe in the
SUBJECT field to the address above.
Other related posts:
