Hi Bill, If you're talking about the tape-end sensors it sounds like you're on the right track. Try Studio Sound Electronics at http://www.iglou.com/studiosound/ Hope this helps. Bill Premium Technologies Ocean Park, WA. 98640 Phone: (360) 665-5984 Fax: (605) 253-4530 email: premtech@xxxxxxxxxxxxxx ----- Original Message ----- From: "Bill S" <billans@xxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, March 26, 2002 6:03 PM Subject: [TechAssist] Sharp TV?VCR 25VT-H60 VCR will not work\ possible parts needed for sensors > > Hi all > This unit came in couple of weeks ago. I had posted this as the unit will > take the tape in and then spit it back out. This unit has take up and > supply sensors on a board in the bottom of the VCR. The sensors are an > emitter and receiver package and their locations D7702 and D7703. I > replaced the center LED as someone had suggested doing. I used the > universal Funai/Symphonic LED. > Does anyone know if those take up and supply sensors causes these problems > and if so, where does one get them? > Thanks > > Bill Sorensen > New Life Video & Audio > billans@xxxxxxxxxxxx > - - - - - - - - - - - - - - - - - - - > > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.