In a message dated 11/28/2001 1:25:46 PM Pacific Standard Time, littletiger67@xxxxxxxxx writes: << Subj: [TechAssist] Sharp Camcorder VLE630U - No Record. Date: 11/28/2001 1:25:46 PM Pacific Standard Time From: littletiger67@xxxxxxxxx (George Winters) Sender: techassist-bounce@xxxxxxxxxxxxx Reply-to: techassist@xxxxxxxxxxxxx To: techassist@xxxxxxxxxxxxx Howdy Y'all, I've got a Sharp Camcorder in my shop today, model VLE630U has picture on LCD when it in play mode thru the Vcr of the camcorder, however no video or record when its in the camera mode. All voltage reading from power supply seems to check good. I don't have the schematics for this model. However there are two film circuit that are run down into the LCD, from the CCD drive and there is no voltage on either of these circuits. Does anyone know what the voltage reading should be here. Thanks. George Winters Jr. GLW Custom Electronics Tn. --------------------------------- Sound like the flex cable to and from the camera section has torn. Turn the turrent of the two assemblies ,if it does not come to a hard stop at either end it has broken through it's stop tearing the flex cables. There one part # for this cable assembly. I'm at home now, but if you want I can look it up for you tomarrow at my day job. I've replaced a couple dozen of these, and is still pretty much of a pain to do . I go major labor every time. Larry N.C.S. ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe