Thanks Damon..... -Ed- > > Any chance you replaced some caps by the IHVT? There is one or two power > supplies that provide Vert B+ and if those are leaky, you have vertical > foldover at the top. > There's normally a 27 volt supply by itself, or a 16 volt and a 45 volt > supply....sometimes a + and - 15 volt supply (but that's Sony) that I know > of. Good Luck > > Damon Brunger > damon101@xxxxxxxxxxxxxx > Telrad Electronic Services > Ft Wayne, IN 46815 > ----- Original Message ----- > From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx> > To: <techassist@xxxxxxxxxxxxx> > Sent: Wednesday, November 28, 2001 3:19 PM > Subject: [TechAssist] Re: Samsung 27: CT-6331WCX > > >> >> I can't see any chassis No. >> I'll just keep replacing till I hit the right one. >> >> Thanks. >> >> -Ed- >> teltek@xxxxxxxxxxx >> TEL-TEK ELECTRONICS. >> >> >> >> >> >> ----- Original Message ----- >> From: "AL LEATHERMAN" <alleathe@xxxxxxxxxxxxx> >> To: <techassist@xxxxxxxxxxxxx> >> Sent: Wednesday, November 28, 2001 2:56 PM >> Subject: [TechAssist] Re: Samsung 27: CT-6331WCX >> >> >>> >>> na sams, ED, Is there some way to convert to lower 48 models? al >>> >>> >>> ----- Original Message ----- >>> From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx> >>> To: "AAAA TECH-ASSIST" <techassist@xxxxxxxxxxxxx> >>> Sent: Wednesday, November 28, 2001 2:12 PM >>> Subject: [TechAssist] Samsung 27: CT-6331WCX >>> >>> >>>> >>>> This set has vertical retrace top of picturem, Have tried replacing >>> various >>>> caps in the vertical to no avail. >>>> IC301 (Vert O/P) is TA8445K. Do not have one in stock. Before I order >> one, >>>> are their any capacitors that I may have missed. Replaced all the ones >> in >>>> and around heat sink. (5). >>>> >>>> TIA >>>> >>>> -Ed- >>>> >>>> teltek@xxxxxxxxxxx >>>> TEL-TEK ELECTRONICS. >>>> >>>> >>>> >>>> >>>> >>>> >>>> ================================= >>>> Help make your TechAssist database better! >>>> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips >>>> ================================= >>>> To UNSUBSCRIBE your email address, click here: >>>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>>> >>> >>> ================================= >>> Help make your TechAssist database better! >>> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips >>> ================================= >>> To UNSUBSCRIBE your email address, click here: >>> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >>> >>> >> >> ================================= >> Help make your TechAssist database better! >> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips >> ================================= >> To UNSUBSCRIBE your email address, click here: >> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe >> >> > > ================================= > Help make your TechAssist database better! > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips > ================================= > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > -- From: Ed Gaidies teltek@xxxxxxxxxxx Tel-Tek Electronics ================================= Help make your TechAssist database better! Submit your fixes here: http://circuitwork.com/techassist/tip/#tips ================================= To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe