Prakash, Take a look at the carriage drive gear, it's the plastic gear on the deck that engages the rack gear on the cassette carriage. Inspect it, and the master cam gear, which is the gear it engages, for tooth damage. If it is making noise in the loading sequence a gear problem is most likely the cause. Hope this helps. Bill Premium Technologies Ocean Park, WA. 98640 Phone: (360) 665-5984 Fax: (775) 860-7747 email: premtech@xxxxxxxxxxxxxx ----- Original Message ----- From: "Patel, Prakash" <Prakash.Patel@xxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Monday, March 18, 2002 6:37 AM Subject: [TechAssist] SONY VCR SLV-772 H F > Hi gang, > > I have one vcr yesterday, customer says when he put the cassette in it > makes noise, I have opened up and tried to put the tape, sounds like it will > load half way, both post poles will go all the way back and after that make > some kind of noise than stops, looks like needs a mechanical setup, I > called Sony Company and they said I have to buy service manual for $ 90.00 ( > CND). > Does anyone have a set up diagram and fax it to me, 416-204-5899 > > Is there any common problem with any gears on these kind of vcrs, any tips > will be helpful. Also what is the web site address for win tip or help > tips. I am a member for tech-assist and also have username and password but > don't know from which side do I start. Again thanks in advance. > > > Thanks > Prakash Patel > 416-204-5891 > 1-800-575-4662 X 5891 > Fax: 416-204-5899 > Toronto > Canada > > > > ------------------------------------------ > Make your TechAssist database better! > Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ > ------------------------------------------ > To UNSUBSCRIBE your email address, click here: > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe > Or send a BLANK email with unsubscribe in the > SUBJECT field to the address above. ------------------------------------------ Make your TechAssist database better! Submit Repair Tips here: http://www.tech-assist.org/secure/tip/ ------------------------------------------ To UNSUBSCRIBE your email address, click here: mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe Or send a BLANK email with unsubscribe in the SUBJECT field to the address above.