Walter, are you sure there are two zeros in the part number NJM78LR005? I did a google search using number NJM78LR05 and found the data sheet on it, and yes 8 pin surface mount is one of the case styles it is available in. Gary McCartney McCartney Electronics Guelph Ontario Canada Est. 1984 email: gary (at) number63.ca walter wood wrote: > > 7 volt stand by is present on pin 1 ic002. > Pin 8 is the output and has about 2 volts on it. > Lifting pin 8 does not restore the 5v standby 0n > pin 8. > The only part no. is on the schematic NJM78LR005. > That does not show up at Tritronics or in a google > search. > This is a 8 legged(4 on a side) surface mount 5 > volt regulator. > I feel that it is bad but wanted to ask the list if > anyone thought the problem could be something else, > and where to get it. > Thanks > Walter > > ===== > Walter Wood > Future Tech Home Center > 2786 Hwy. 43 N. > Lawrenceburg Tn. 38464 > 931-829-3337 > Fax 931-829-4044 > mailto:wwood_38478@xxxxxxxxx > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ -- ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/