Sounds like Vertical, the + and - 15v is used together to drive the output.You may have missing input vert sig to the final output (which is only an op amplifier), I think. Damon Brunger Telrad Electronics Ft. Wayne, IN ----- Original Message ----- From: "Tony S" <tcselectronics@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, November 16, 2004 12:40 PM Subject: [TechAssist] SONY KP57XBR10W Dead constant led blink > Hi guys, > This sony is dead has no power supply secondary on audio or main, no code > given just constant blink.A relay is heard at power plug in. I found that > if I disconnect the plug with 135v , -15,+15 supplies the power supply > will come up. at proper voltages .there is no shorts on any supplies or > sub supplies off the main, the convergence modules have been disconnected > and the vert out has been disconnected still the supply is loaded. if the > horiz output and scan output are disconnected at collector the B+ is still > low about 90v but if the +15, -15v supply are disconnected at supply the > B+ comes up. just cant seem to find anything shorted. Any ideas > appreciated. > > thanks, > > Tony Saracco > TCS ELECTRONICS > 406 Andra Ct. > Gilberts, IL 60136 > tcselectronics@xxxxxxxxx > > > ----------------------------------------------------------------------------- > Lost Password: > http://www.tech-assist.org and select "Login Problems?". > Email Archives: > //www.freelists.org/archives/techassist/ > > ----------------------------------------------------------------------------- Lost Password: http://www.tech-assist.org and select "Login Problems?". Email Archives: //www.freelists.org/archives/techassist/