Fred, Im not familar with that model but dont rule out loose connection/solder/bent pin. I worked on a NEC a week ago that did the same turned out to be broken pin in Connector that senses PC is on then HV will fire up Eric Haskins <alphabet removed for sake of the list> Eric Haskins Consulting Clearwater, FL 727-449-1936 ----- Original Message ----- From: <fremur01@xxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, October 29, 2002 7:42 PM Subject: [TechAssist] SONY 20" MONITOR - H/V SHUTDOWN? > > Hello, > > This unit came into the shop late today. Appears to be > going into high voltage shutdown, powers up (green > LED) for about 5 seconds then Yellow LED flashes. I > havent been able to measure the H/V even though I hear > it building up. > > Will tear it down further tomorrow to inspect > regulator FBT circuits. Does anyone have case history > info on this model? > > Item specs: SONY MONITOR MDL: CPD-20FS2 FCC ID#: > AK8GDM20F03 > > Thanks Much > > Fred > MTS Electronics > Fayetteville, NC > (910)609-8780 > fremur01@xxxxxxxxx > > > __________________________________________________ > Do you Yahoo!? > HotJobs - Search new jobs daily now > http://hotjobs.yahoo.com/ > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/