[TechAssist] Re: SONT TV - KV-36FV1 Bad Colors on pix tube
- From: mebonnell@xxxxxxxxx (Max Bonnell)
- To: techassist@xxxxxxxxxxxxx
- Date: Fri, 4 Jun 2004 09:40:45 -0500
I never thought I would see the day when we were teaching how to use a
degausing coil.
Max Bonnell
Bonnell TV
Robinson, IL
Sender: techassist-bounce@xxxxxxxxxxxxx From:
hoytstv@xxxxxxxxxxx(Hoyt's=A0TV) Date: Fri, Jun 4, 2004, 9:22am (CDT+1)
To: techassist@xxxxxxxxxxxxx Subject: [TechAssist] Re: SONY TV -
KV-36FV1 Bad Colors on pix tube. Reply=A0to: techassist@xxxxxxxxxxxxx
I haven't used a pencil degausser since the last 8 track came in. How
long does it take to cover the whole screen on a 36" TV? I tried to
paint my father's house with a crayon once. (4 hours)
Russ Hoyt
Hoyt's TV
Exeter, NH
----- Original Message -----
From: "Damon" <damon101@xxxxxxxxxxxxxx>
To: <techassist@xxxxxxxxxxxxx>
Sent: Friday, June 04, 2004 7:38 AM
Subject: [TechAssist] Re: SONY TV - KV-36FV1 Bad Colors on pix tube.
OK, now everyone knows how to use the Big degausser....I can just see
you pulling out the recommended Sony Pencil Wand and doing your little
dance.....
Damon Brunger
Telrad Electronic Services
Ft Wayne, IN 46815
----- Original Message -----
Subject: [TechAssist] Re: SONY TV - KV-36FV1 Bad Colors on pix tube.
| Me to. Thats the way I saw taught, before dirt was invented. | Jerry
|
| Alpha 21 Electronics
| www.alpha21century@xxxxxxxxxxxxx
|
| ElectronicRepairServices <ElectronicRepair@xxxxxxxxxxxx> wrote:
| I called the costumer and asked him when and how did this happened and
he | told me that it happened during a storm. | Electronic Repair
Services
||
----- Original Message -----
| From: "Hoyt's TV"
| Sent: Wednesday, June 02, 2004 7:26 PM | Subject: [TechAssist] Re:
SONY TV - KV-36FV1 Bad Colors on pix tube.
|
| > The way I learned to do it, back in the stone age, was to start 6
feet | away
| > from the front with the coil perpendicular when you turn it on. Then
turn
| it
| > sideways and with a circular motion bring it up to the tube,
covering all
| > the tube then back off the same way and turn it perpendicular before
| turning
| > it off. Not necessary to do the sides and back unless you suspect
some | metal
| > there, got magnetized.
|=A0>
| > Before the advent of automatic degaussing, we had to degauss every
time we
| > moved a set because it was the movement through the earths magnetic
field
| > that magnetized the shadow mask. That wasn't strong enough to have
much | > affect on the shields but telephone bells and vacuum cleaners
would do a | job
| > on them. (I remeber that Russ)
|=A0>
| > Russ Hoyt
| > Hoyt's TV
| > Exeter, NH
| > ----- Original Message -----
| > From: "Bruce Tiedeman"
| > To:
| > Sent: Wednesday, June 02, 2004 3:40 PM | > Subject: [TechAssist] Re:
SONY TV - KV-36FV1 Bad Colors on pix tube.
|=A0>
|=A0>
| > > Russ , I leave the set on. Put the Degaussing coil in front of the
tube
| > and
| > > energize the coil . Move the coil in a circular motion in front
and | around
| > > cabinet sides, bring the coil around front again moving it away
from the
| > > tube as you go. I then turn off the coil and abruptly turn the
coil | > > perpendicular to the set .
| > > That's it, works good unless set has been dropped. If the set has
been | > > dropped or hit by lightning may take a lot more work. Repeat
the | > procedure.
| > > Some times the degaussing circuit malfunctions and you have to
repair. | > >
Bruce
|=A0>=A0>
| > > .B&T Electronics
| > > ----- Original Message -----
| > > From: "Hoyt's TV"
| > > Sent: Wednesday, June 02, 2004 3:05 PM | > > Subject: [TechAssist]
Re: SONY TV - KV-36FV1 Bad Colors on pix tube. | > > > I've been using
that big black horse collar for over 40 years, and | > haven't
| > > > lost a patient yet.
|=A0>=A0>=A0>
| > > > If you do something stupid like turn it off while it's next to
the | tube,
| > > it
| > > > will magnetize the shadow mask so it looks like it needs to be |
> degaussed.
| > > > Sometimes enough so it takes a lot of degaussing to undo what
you
did.
|=A0>=A0>=A0>
|=A0>=A0>=A0>
| > > > Russ Hoyt
| > > > Hoyt's TV
| > > > Exeter, NH
| > > > ----- Original Message -----
| > > > From: "ElectronicRepairServices" | > > > To:
| > > > Sent: Wednesday, June 02, 2004 2:15 PM | > > > Subject:
[TechAssist] SONY TV - KV-36FV1 Bad Colors on pix tube. | > > > > I have
to go on a service call on this TV, the costumer says that | the
| > > > colors
| > > > > are bad, sounds like the degausing is bad on this TV, it could
be
as
| > > > simple
| > > > > as resoldering the degausing thermistor.
| > > > > My question is, and I have heard conflicting reports, could I
use
| the
| > > hand
| > > > > held degausing coil to degause the pix tube, some servicers
say
that
| > > could
| > > > > damage the pix tube.
| > > > > Thank you, Mark
----------------------------------------------
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
