Ron; Also change Q5104 on the CRT board, for your low brightness/contrast problem.. -Ed- Tel-Tek Electronics Midland, Ont. Canada. teltek2@xxxxxxxxxxxx "Quality will be remembered, long after Price is forgotten" ----- Original Message ----- From: Ron Price To: teltek2@xxxxxxxxxxxx Sent: Wednesday, May 08, 2002 10:07 AM Subject: Repost: Zenith TV Model#SY2751Y 9-1585-1 Color not adjusting Ed, On this set the RX3415 Thermister was broken off and laying inside the cover, also the 3 yoke spacers were laying inside the cover. Replaced the above parts and fired up the set..Picture was good but could not adjust the color, tint, brightness, and contrast but very little or not at all......Tried to turn the color off within the menu setup but got a pinkish tint to the background and the black was ok....Also put a color bar generator to the set and there was no green.....Can you help with voltages where needed?...Sorry to confuse you with my term "Bottle", one of my instructors said that once and it stuck...Any help woiuld be appreciated. Ronald J. Price Service Tech. Terry's Computer Shack 719 Washington P. O. Box 655 Mendota, Il. 61342 Phone: 815-539-3210 Fax: 815-539-7521 Email: ron_tcshack@xxxxxxxxxxx ------------------------------------------------------------------------------ Get your FREE download of MSN Explorer at http://explorer.msn.com. ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/