Did you try www.tubesandmore.com for the lamps/fuses ?? Jose' Reyes @ Kwik Fix TV 619 Pondella Rd. N. Ft. Myers, Fl. 33903 E-Mail: jr@xxxxxxxxxxx ----- Original Message ----- From: "babalino" <babalino@xxxxxxxxxxxxxxxxxxxxxx> To: <techassist@xxxxxxxxxxxxx> Sent: Tuesday, November 19, 2002 2:23 AM Subject: [TechAssist] Realistic STA-16B amplifier problem (lights needed - like fuses) > > I have a problem with a "fairly old" amplifier (Realistic STA-16B) It has 8 > ohm speakers and 150W output. Problem is that one channel is muffled (barely > noticeable) - the output IC is fine. Any help? Also, the four 'light display > "fuses?"' are blown. (will not work without these). They are (X3) 12V, in > series, at 0.25A and one at 6V at 1.5A. They are 30mm in length and are > glass fuses - nothing else written on them. Any help where I can get > replacements. I know it is a bit of a long-winded question but would really > appreciate some help here. > Thanks again babalino > > Mr D Graham > Grahams Electronics > 978 Walker Road > Newcastle upon Tyne > England > > > > > > ------------------------------------------ > To REMOVE your email address, click here: > http://www.tech-assist.org/unsubb.html > To CHANGE your email address, click here: > http://www.techassist.net/forms/change.html > ------------------------------------------ > ***NEW*** Tips Added Instantly!!!*** > Submit Repair Tips here: > http://www.tech-assist.org/secure/tip/ > ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html ------------------------------------------ ***NEW*** Tips Added Instantly!!!*** Submit Repair Tips here: http://www.tech-assist.org/secure/tip/