[TechAssist] Rca Model F27450\atc113 chasis FIXED!
- From: armando guerra <birdie@xxxxxxxxxxxxx>
- To: "techassist@xxxxxxxxxxxxx" <techassist@xxxxxxxxxxxxx>
- Date: Thu, 08 Jan 2004 09:34:55 -0700
This is the set that would start scanning channels after a few min.Once
it started doing this,there was no control from any of the buttons or
remote.Well,for the 3rd time,I removed the front button assembly and
checked it again very carefully.All solders were ok.This is a 2003 model
tv.While I had the bd out,the pix at this time was ok.Could change ch up
and dn and would lock ok.So,I tapped on this bd and guess what,channels
start hunting like crazy.I tapped it again and it stoped.However,no
loose connections.
I then removed the ch up switch,started set up and pix was ok.Hit the bd
at different area's and pix still ok.I re-installed ch up switch,hit it
again,pix starts scanning.
So,the fix was a bad ch up tact switch.So new and already with
problems.Any way,thanks to all with their help and suggestions.Mando
Birdie's TV & Electronics
Casa Grande, AZ
-----------------------------------------------------------------------------
Jokes, complaints, off topics, general chat. Everything other than repair
help problems can be found at this new list. No archives and posts will not
be found on Google or any other engine!To remove or join, email
chat-request@xxxxxxxxxxxxxxx with remove or join as the subject.
Send to the list at chat@xxxxxxxxxxxxxxx once subscribed.
-----------------------------------------------------------------------------
Lost Password:
http://www.tech-assist.org and select "Login Problems?".
Email Archives:
//www.freelists.org/archives/techassist/
Other related posts:
